Specifications

Unloading
975-0581-01-01 3–3
This manual is for use by qualified personnel only
Moving with a Forklift
Refer to Figure 3-1 for center of gravity information and Figure 3-2 for forklift
locations.
Moving with a Crane
To move the Xantrex inverter with a crane:
1. Attach the crane to the four anchor points on the rails.
2. Lift the enclosure into position.
3. Remove the lifting rails on top of the Xantrex inverter before operating the
inverter.
Figure 3-2 Forklift Lifting Locations - Underneath Unit
Figure 3-3 Lifting Using a Crane
Important: Before proceeding with the installation, determine the location and
layout of the components, conduit penetration locations, conductor and conduit
sizing, and method for anchoring the unit. Ensure adequate space is provided
for clearance for ventilation and serviceability. Review Chapter 2, “Planning” if
necessary before proceeding.