Installation manual

Safety
152364 ix
This manual is for use by qualified personnel only.
General Safety Precautions
1. When installing the Xantrex GT100 E use only components recommended or
sold by Schneider Electric. Doing otherwise may result in a risk of fire,
electric shock, injury to persons, and will void the warranty.
2. Do not attempt to operate the Xantrex GT100 E if it has been dropped, or
received more than cosmetic damage during transport or shipping. If the
Xantrex GT100 E is damaged, or suspected to be damaged, see the
Warranty for this unit in the Xantrex GT100 E 100 kW Grid-Tied Photovoltaic
Inverter Operation and Maintenance Manual (Part # 152365).
3. To reduce the risk of electrical shock, lock-out and tag the Xantrex GT100 E
before attempting any maintenance, service, or cleaning.
Personal Safety
Follow these instructions to ensure your safety while working with the Xantrex
GT100 E.
Qualified Personnel
Only qualified personnel should perform the transportation, installation, initial
operation and maintenance of the Xantrex GT100 E (IEC 364 or CENELEC HD
384 or DIN VDE 0100 and IEC 664 or DIN VDE 0110). Follow all national accident
prevention regulations.
Qualified personnel, within the meaning of these basic safety regulations, will be
people who are familiar with the installation, assembly, start-up and operation of
the Xantrex GT100 E and have the appropriate qualifications with respect to their
functions.
Safety Equipment
Authorized service personnel must be equipped with standard safety equipment
including the following:
• Safety glasses
• Ear protection
• Steel-toed safety boots
• Safety hard hats
• Padlocks and tags
• Appropriate meter to verify that the circuits are de-energized
(1000 Vac and DC rated, minimum)
Check local safety regulations for other requirements.