Installation manual
Table Of Contents
- Xantrex™ GT100 E 100 kW Grid-Tied Photovoltaic Inverter
- Xantrex GT100 E 100 kW Grid-Tied Photovoltaic Inverter
- Copyright and Contact
- About This Manual
- Important Safety Instructions
- Contents
- Figures
- Tables
- Introduction
- Planning
- Installation
- Verification and Commissioning
- Specifications
- Commissioning Test Record
Moving Instructions
152364 3–3
This manual is for use by qualified personnel only.
Unpacking the Xantrex GT100 E
To unpack the Xantrex GT100 E from the shipping crate:
1. Remove the crate’s wood side and top panels.
2. Remove the barrier bag material from the inverter.
3. Remove the inverter’s anchor hardware that bolts the inverter to the pallet.
Moving Instructions
To move the Xantrex GT100 E using a forklift:
1. Place the forks of the forklift below the unit at the points specified in Figure 3-
2.
2. Lift the Xantrex GT100 E from beneath the enclosure.
Be sure to use a forklift with a sufficiently spaced fork span.
3. Remove the pallet from underneath the unit.
Figure 3-2 Forklift Lifting Locations - Underneath Unit