Installation manual

Safety
x 153396 Revision D
This manual is for use by qualified installers only
Personal Safety
Follow these instructions to ensure your safety while working with the Xantrex
GT250.
Never work alone when servicing this equipment. A team of two is required until
the equipment is properly de-energized, locked-out and tagged-out, and verified
de-energized with a meter.
Thoroughly inspect the equipment prior to energizing. Verify that no tools or
equipment have inadvertently been left behind.
Qualified Personnel
Only qualified personnel should perform the troubleshooting and maintenance of
the Xantrex GT250. Follow all national and local electrical codes and worker
safety regulations.
Qualified personnel have training, knowledge, and experience in:
• Installing electrical equipment and PV power systems (up to 1000 V).
• Applying all applicable installation codes.
• Analyzing and reducing the hazards involved in performing electrical work.
• Selecting and using Personal Protective Equipment (PPE).
Safety Equipment
Authorized service personnel must be equipped with standard safety equipment
including the following:
• Safety glasses
• Ear protection
• Steel-toed safety boots
• Safety hard hats
• Padlocks and tags
• Appropriate meter to verify that the circuits are de-energized
(1000 Vac and DC rated, minimum)
Check local safety regulations for other requirements.