Installation manual

Safety
xiv 153396 Revision D
This manual is for use by qualified installers only
7. Ensure that all incoming energy sources are de-energized by checking the
following AC utility terminal locations at all line-to-line and all line-to-ground
configurations.
• AC Utility Terminals: [TB1-A, TB1-B, TB1-C, TB1-N, and TB2 (GND BUS)]
See Figure i on page 1–xiv for the location of these terminals.
Figure i
AC Terminal Connections from the Utility
TB1-N terminal TB1-B Phase terminal
TB1-A Phase terminal
TB1-C Phase terminal
TB2 Ground bar