Installation manual

Planning
2–6 153396 Revision D
This manual is for use by qualified installers only
Conduit Entry
For a typical Xantrex GT250 installation, the recommended cable entry is from
beneath the enclosure. Figure 2-2 shows the maximum allowable areas (shaded)
and locations in which electrical conduits should be located when cable entry is
from beneath the enclosure.
When routing cable and conduit, some installations may make it necessary to
penetrate the enclosure from above ground. Figure 2-3 on page 2–7 shows the
maximum allowable areas (shaded) and locations in which electrical conduits
may penetrate the enclosure of the Xantrex GT250.
Figure 2-2 Conduit Entries Beneath Enclosure, Bottom View
56.00
5.84
1436 mm
(56.54 in)
308 mm
(12.11 in)
127 mm
(5.00 in)
127 mm
(5.00 in)
57 mm
(2.23 in)
57 mm
(2.23 in)
427 mm
(16.82 in)
415 mm
(16.32 in)
282 mm
(11.11 in)