Installation manual

Installation
3–14 975-0601-01-01 Revision B
This manual is for use by qualified personnel only.
Figure 3-10 Throat connection kit: installing top cover and bottom cover
Figure 3-11 Throat connection kit: TB13 and TB14 connections on the inverter assembly
Sliding the top throat cover down over the flanges
Engaging the tabs on the bottom throat cover
TB13 TB14
Install the two 120 VAC 8 AWG power cables
(labelled TB13-12 and TB14-12) onto the upper
right-most screw terminal of the distribution
blocks TB13 and TB14.
TB13 TB14