Installation manual

Verify AC, DC, and Power Tracking Operational Parameters
975-0601-01-01 Revision B 4–11
This chapter is for use by qualified personnel and authorized service personnel only.
Verify AC, DC, and Power Tracking Operational Parameters
For each of the following parameters, readings are shown on the display. Access
the
WRITE menu parameter list by pressing the MENU key, and then entering the
password
594. Using the \/ key, scroll down in the WRITE menu and record the
parameter settings here and in “Step 8. Confirm Write Menu Parameters for AC
Limits” through “Step 10. Confirm Write Menu Parameters for Power Tracker
Configuration” on the form in Appendix C.
Max AC Volts %
Max Volt Delay
Min AC Volts
Min Volt Delay
Max AC Freq
Max Hz Delay
Min AC Freq
Min Hz Delay
Auto Clear Delay
PPT V Ref
PV V Start
PV T Start
PV T Stop
PV P Stop
I PPT Max %
I Manual %
PPT Enable
PPT Rate
PPT V Step
Modbus ON
Modbus Address