Installation manual

Commissioning
4–14 975-0601-01-01 Revision B
This chapter is for use by qualified personnel and authorized service personnel only.
To configure the Xantrex GT500’s Modbus address:
1. If the display has reset to its default, press
MENU, type in the password 594,
and then press
ENTER.
2. Using the arrow keys, scroll to the
Modbus Address option, and then press
ENTER.
3. Type in the new address, and then press
ENTER.
Complete Commissioning
To complete commissioning:
1. Once you have successfully completed all the commissioning steps, scan
the “Commissioning Test Record” to send it via e-mail or make a photocopy
to send it via regular mail.
2. Send an e-mail message with the completed Commissioning Test Record to
[e-mail]
or mail to:
Xantrex Technology Inc.
161-G South Vasco Road
Livermore, CA
USA
Attention: Customer Service
Figure 4-1 Xantrex RS485/Modbus Communications Kit