Installation manual

Specifications
A–2 975-0601-01-01 Revision B
This manual is for use by qualified personnel only.
The Xantrex GT500 has been designed for photovoltaic power systems that
operate within the following specifications.
Environmental Specifications
WARNING
HAZARD OF ELECTRIC SHOCK, EXPLOSION, FIRE, AND ARC
FLASH. HAZARD OF EQUIPMENT DAMAGE.
Unsafe conditions and damage to the Xantrex GT500 could result if the
instructions and the electrical, physical, and environmental installation
specifications in this Manual are not obeyed.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.
Table A -1 Environmental specifications
Specification Value
Dimensions
Overall Assembly
Inverter Assembly Only
Transformer Assembly Only
2240 mm H x 4638 mm W x 1088 mm D
(88.2 in. H x 182.6 in. W x 42.8 in. D)
2240 mm H x 2200 mm W x 890 mm D
(88.2 in. H x 86.6 in. W x 35.0 in. D)
2240 mm H x 2133 mm W x 1088 mm D
(88.2 in. H x 84 in. W x 42.8 in. D)
Weight
Inverter Assembly
Transformer Assembly
1225 kg (2700 lbs)
1878 kg (4140 lbs)
Allowable Ambient Temperature
Operating
Storage
-20 °C to 50 °C Maximum (-4 °F to 122 °F)
-20 °C to 50 °C Maximum (-4 °F to 122 °F)
Relative Humidity Up to 95%, non-condensing during shipping and storage;
outdoor-rated during operation
Maximum Elevation 2000 m (6600 ft)
Clearance (ventilation and
serviceability)
Above
Front
Sides
Rear
305 mm (12 in.)
1220 mm (48.0 in.) (door clearance) or more if required by local
safety standards
0 mm (0 in.)
305 mm (12 in.)
Enclosure Type Type 3R, zinc primer, highly reflective, powder coating finish.
Cabinet Color RAL 9003 matte 50% gloss