Specifications

54
Schneider Electric Xantrex
XW MPPT 60 150 Solar Charge
Controller
TheXantrexXWMPPT60150isaphotovoltaic(PV)chargecontroller
thattrackstheelectricalmaximumpowerpointofaPVarraytodeliver
themaximumavailablecurrentforchargingbatteries.Whencharging,
theXWMPPT60150regulatesbatteryvoltageandoutputcurrentbased
ontheamountofenergyavailablefromthePVarrayandstate-of-charge
ofthebattery.
Features
Canbeusedwith12,24,36,48,and60Vbatterysystemsandis
abletochargealowernominalvoltagebatteryfromahighernominal
voltagearray
MaximumPowerPointTracking(MPPT)algorithmcontinuallyseeks
themaximumpoweravailablefromthePVarray
IntegratedPVground-faultprotectionfornegativegroundedarrays
Convection-cooleddesigndoesnotrequireacoolingfan−large,
aluminum,die-castheat-sinkallowsfulloutputcurrentupto45°C
withoutthermalderating
Selectabletwoorthree-stagechargingalgorithmswithmanual
equalizationtomaximizesystemperformanceandimprovebatterylife
Congurableauxiliaryoutput
Two-line,16-characterliquidcrystaldisplay(LCD)andfourbuttons
forcongurationandsystemmonitoring
Inputover-voltageandunder-voltageprotection,outputover-current
protection,andbackfeed(reversecurrent)protection(warningandfault
messagesappearonLCDwhenunitshutsdownasaprotectivemeasure)
Canalsobeusedwithotherbattery-basedsolarenergysystems
Over-temperatureprotectionandpowerderatingwhenoutputpower
andambienttemperaturearehigh
BatteryTemperatureSensor(BTS)included−automaticallyprovides
temperaturecompensatedbatterycharging
Xanbus
-enablednetworkcommunicationsprotocol
Five-yearwarranty
Off-grid and backup
> Solar charge controllers