Technical Data Bulletin

19-108
© 2019 Schneider Electric
All Rights Reserved
Control Stations and Enclosures
XAP 22 mm Enclosures and Accessories
schneider-electric.us
Refer to Catalog 9001CT1104
ZENL1111
ZALV••
Table 19.330: Electrical Block and Accessories (for mounting on metal plate at
back of enclosure)
[4]
Description Type
Color
Catalog Number
Electrical blocks with screw clamp terminal connections
Metal-plate-mounting
contact blocks
N.O. contact — ZENL1111
N.C. contact — ZENL1121
Light blocks with
24 Vac/Vdc
White
Green
Red
Yellow
Blue
ZALVB1
ZALVB3
ZALVB4
ZALVB5
ZALVB6
120 Vac
White
Green
Red
Yellow
Blue
ZALVG1
ZALVG3
ZALVG4
ZALVG5
ZALVG6
230 Vac
White
Green
Red
Yellow
Blue
ZALVM1
ZALVM3
ZALVM4
ZALVM5
ZALVM6
ZB5SZ3
ZB5AZ905
Table 19.331: Accessories for electrical blocks
Description Application Catalog Number
Blanking plug
Ø 22 mm units ZB5SZ3
Nut
Head mounting
ZB5AZ901
Grounding terminal Grounding
XALZ09
Key For tightening nut
ZB5AZ905
XAP Enclosures and Accessories
XAPA1100
Table 19.332: Undrilled Enclosures, Glass-Reinforced Polyester
Type
H x W Dimensions
Catalog
Number
IN mm
NEMA 4, 4X, 13
Usable depth 3.27 in. (83 mm)
Without hinges
3.34 x 5.75 85 x 146 XAPA1100
3.34 x 8.90 85 x 226 XAPA2100
5.95 x 9.49 151 x 241 XAPA3100
With hinges
5.95 x 9.49 151 x 241 XAPA4100
Undrilled Grounding Plate
Sheet steel with ground
screw
For XAPA1100 XAPZ100
For XAPA2100 XAPZ200
For XAPA3100 and 4100 XAPZ300
XAPA1104
Table 19.333: Drilled Insulated Enclosures, Glass-Reinforced Polyester [5]
Type
Number of
Knockouts
22 mm
Number of Rows H x W Dimensions
Catalog
Number
Vertical Horizontal IN mm
NEMA 4, 4X, 13
Usable depth 3.27 in.
(83 mm) 1.58 in. (40
mm) centerline
spacing of holes
1 1 1 3.35 X 5.75 85 X 146 XAPA1110
2 1 2 3.35 X 5.75 85 X 146 XAPA1120
4 2 2 3.35 X 5.75 85 X 146 XAPA1104
8 2 4 3.35 X 8.90 85 X 226 XAPA2108
16 4 4 5.94 X 9.49 151 X 241 XAPA3116
Drilled Grounding Plate
Sheet steel with ground
screw
For XAPA1110 XAPZ110
For XAPA1120 XAPZ120
For XAPA1104 XAPZ104
For XAPA2108 XAPZ208
For XAPA3116 XAPZ316
XAPG39400
Table 19.334: Undrilled Die Cast Enclosures (Painted Gray RAL7032)
Type
Material
Usable Depth
H x W x D Dimensions
Catalog
Number
IN mm IN mm
NEMA 4, 13
Zinc
1.93 49
3.15 x 3.15 x 2.03 80 x 80 x 51.5 XAPG19100
5.12 x 3.15 x 2.03 130 x 80 x 51.5 XAPG29100
6.89 x 3.15 x 2.03 175 x 80 x 51.5 XAPG39100
2.93 74.5
3.15 x 3.15 x 3.03 80 x 80 x 77 XAPG19400
5.12 x 3.15 x 3.03 130 x 80 x 77 XAPG29400
6.89 x 3.15 x 3.03 175 x 80 x 77 XAPG39400
8.66 x 3.15 x 3.03 220 x 80 x 77 XAPG49400
Aluminum 2.93 2.93 12.20 x 3.35 x 3.03 310 x 85 x 77 XAPG59400
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[4] For customer assembly using XB5 operators and standard screw-terminal contact blocks, see XB5 Non-Illuminated Operators, page 19-46.
Either mounting method can be used: contact block ZENL mounting on metal plate, or contact block ZBE mounting on operator with mounting collar.
[5] Uses standard XB5 products from XB5 Complete Devices, page 19-43 through XB5 Accessories, page 19-60. Do not use ZENL style contact blocks.