Technical Data Bulletin

© 2019 Schneider Electric
All Rights Reserved
19-109
schneider-electric.us
XAP 22 mm Enclosures and Accessories
Control Stations and Enclosures
Refer to Catalog 9001CT1104
Table 19.335: Drilled Die Cast Enclosures (Painted Gray RAL7032) [6]
Type
Material
Usable Depth Number of
22 mm
holes
H x W x D Dimensions
Catalog Number
IN mm IN mm
XAPG29703
NEMA 4, 13
1.18 in. (30 mm)
centerline
spacing of holes
for horizontal mount
Zinc
1.93 49
2 3.15 x 3.15 x 2.03 80 x 80 x 51.5 XAPG19702
3 5.12 x 3.15 x 2.03 130 x 80 x 51.5 XAPG29703
4 6.90 x 3.15 x 2.03 175 x 80 x 51.5 XAPG39704
2.93 74.5
2 3.15 x 3.15 x 3.03 80 x 80 x 77 XAPG19802
3 5.12 x 3.15 x 3.03 130 x 80 x 77 XAPG29803
4 6.90 x 3.15 x 3.03 175 x 80 x 77 XAPG39804
NEMA 4, 13
1.58 in. (40 mm)
centerline
spacing of holes
for vertical mount
Zinc
1.93 1.93
1 3.15 x 3.15 x 2.03 80 x 80 x 51.5 XAPG19201
2 5.12 x 3.15 x 2.03 130 x 80 x 51.5 XAPG29202
3 6.90 x 3.15 x 2.03 175 x 80 x 51.5 XAPG39203
2.93 74.5
1 3.15 x 3.15 x 3.03 80 x 80 x 77 XAPG19501
2 5.12 x 3.15 x 3.03 130 x 80 x 77 XAPG29502
3 6.90 x 3.15 x 3.03 175 x 80 x 77 XAPG39503
4 8.66 x 3.15 x 3.03 220 x 80 x 77 XAPG49504
Aluminum 2.93 74.5 5 12.20 x 3.35 x 3.03 310 x 85 x 77 XAPG59505
XAPE302 XAPE303
Table 19.336: Drilled Flush Plates [7]
Type
Material
Number of
22 mm holes
H x W x D Dimensions
Catalog
Number
IN mm
NEMA 4, 13
1.18 in. (30 mm)
centerline spacing
of holes
Anodized
Aluminum
1 2.83 x 2.83 72 x 72 XAPE301
2 4.13 x 2.83 105 x 72 XAPE302
3 5.43 x 2.83 138 x 72 XAPE303
4 6.73 x 2.83 171 x 72 XAPE304
5 8.03 x 2.83 204 x 72 XAPE305
Table 19.337: Optional Back Box (for finger protection, if required)
Type
Material For Use With
Catalog
Number
Protective rear covers
Insulating Fiberglass
Flush plate XAPE301
XAPE901
Flush plate XAPE302
XAPE902
Flush plate XAPE303
XAPE903
Flush plate XAPE304
XAPE904
Flush plate XAPE305
XAPE905
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[6] Can use either XB4 or XB5 products.
[7] Can use either XB4 or XB5 products.