Technical Data Bulletin
© 2019 Schneider Electric
All Rights Reserved
19-133
schneider-electric.us
XAC Standard Duty Pistol Grips,
Enclosures, Contact Blocks
Pendant Stations
Refer to Catalog 9001CT1001
XAC Pistol Grip Stations and General Purpose Pendants
XAC pendant stations are designed for standard- or medium-duty control circuit
applications.
•
Single- or two-speed versions
•
Double insulated
•
Shock and corrosion resistant
•
2, 4, 6, 8, 12 element versions
•
Ease of operation
XACA201
XACA06
XACA03 with operators
Table 19.388: Pistol Grip Stations
Description Speeds
Function
Catalog Number
1 speed 2 speed
1 N.O. contact per operator
2 Mechanically interlocked operators
1
XACA201 [12]
2 N.O. (staggered) contacts per
operator
2 Mechanically interlocked operators
2
XACA207 [12]
1 N.O. + 1 N.C.
2 Mechanically interlocked operators
1
XACA205 [12]
1 N.O. contact per direction
1 Mechanically interlocked 2 way
toggle
1
XACD21A0101
[13]
1 N.O. + 1 N.O. staggered
1 Mechanically interlocked 2 way
toggle
2
XACD21A1231
[13]
1 N.O. & 1 N.C. contact per direction
1 Mechanically interlocked 2 way
toggle
1
XACD21A0105
[13]
1 N.C. + 1 N.O. + 1 N.O. staggered
1 Mechanically interlocked 2 way
toggle
2
XACD21A1241
[13]
NOTE: Legends are required to achieve NEMA4 rating.
Table 19.389: General Purpose Pendants[14][15]
Enclosures
Catalog Number
2 hole enclosure XACA02H7
3 hole enclosure XACA03H7
4 hole enclosure XACA04H7
6 hole enclosure XACA06H7
8 hole enclosure XACA08H7
12 hole enclosure XACA12H7
To place a custom pendant order, use the worksheet Type XACA Worksheet, page 19-136 as a guide. Orders
must be placed through the Product Selector in Quote to Cash. There is a 10% charge for assembly.
XAC Contact Blocks
ZB2BE10
XENG37
Table 19.390: Contact Blocks for Operators in Cover
Description Wiring Diagram Catalog Number
1 N.O./spring return/1 speed
— ZB2BE101
1 N.C./spring return/1 speed
— ZB2BE102
1 N.O. early close & 1 N.C. & 1 N.O./spring return/2
speed
Figure 1
XENG1191
1 N.C. & 2 N.O./spring return/1 speed Figure 2
XENG1491
1 N.O. & 1 N.O. latching/1 speed/interlocked Figure 3
XENG3781
1 N.O. & 1 N.C. latching/1 speed/interlocked Figure 4
XENG3791
3 N.C.—all
direct acting
Figure 5
XENT1192
XENG1191
XACS10
Table 19.391: Contact Blocks for Operators in Base of Enclosure [16]
Description Catalog Number
1 N.O./1 speed
XACS101
1 N.C./1 speed
XACS102
2 N.O./1 speed
XACS103
2 N.C./1 speed
XACS104
1 N.O. & 1 N.C./1 speed
XACS105
Wiring Diagrams
13 14
21 22
33
34
13 14
21 22
33
34
13 14 13 14
13 14
11 12
N/C + N/C + N/C
with positive
opening operation
21 11
22 12
23 13
Figure 1 Figure 3 Figure 4 Figure 2 Figure 5
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[12] These units are available with factory installed E-stops. Add a “3” to the end of the catalog number for standard E-stop or add a “4” for a trigger
action E-stop.
[13] These units are available with a factory installed E-stop. Use XACD22 ••• for a standard E-stop or XACD24••• for a trigger action E-stop.
[14] Standard enclosures include internal mounting plate, cable sleeve for 8 to 26 mm, internal cable clamp, suspension ring and cable tie.
[15] For ordering information on custom built XACA pendants, visit our website at www.Schneider-Electric.us.
[16] Cannot be used with XACA03 pendant.