Technical Data Bulletin

19-64
© 2019 Schneider Electric
All Rights Reserved
22 mm Push Buttons XB5R Plastic and XB4R Metal Wireless,
Batteryless Push Buttons
schneider-electric.us
Refer to Catalog DIA5ED2121214EN
ZBRRA
Table 19.192: Programmable Receivers
Description Output Type Voltage Receiver V
Catalog
Number
Programmable receivers
equipped with:
- 2 buttons (“Scroll-through”,
“Ok”)
- 6 indicating LEDs (power ON,
outputs, signal strength)
4 PNP outputs, 200 mA / 24 V
24
ZBRRC
2 relay outputs type
RT 3A [95]
24 to 240
ZBRRD
2 relay outputs type
RT 3A [95]
24 to 240
ZBRRA
NOTE: Also refer to Access Point for advanced features in programmable receivers.
ZBA7235 ZBA7331
ZBA7432
ZBA79
Table 19.193: Caps for Harmony Push Button Heads ZB5RZA0 and ZB4RZA0
Description Background Color Marking
Sold in
lots of
Catalog
Number
Sets of 10 different colored
caps with identical marking
[96]
White
Without 10 ZBA71
“I” (black)
10 ZBA7131
“
” (black)
10 ZBA7134
“+” (black)
10 ZBA7138
Black
Without 10 ZBA72
“O” (white)
10 ZBA7232
“+” (white)
10 ZBA7233
“
” (white)
10 ZBA7235
“I” (white)
10 ZBA7237
Green
Without 10 ZBA73
“I” (white)
10 ZBA7331
“+” (white)
10 ZBA7333
“
” white 10 ZBA7335
“II” (white)
10 ZBA7336
Red
Without 10 ZBA74
“O” (white)
10 ZBA7432
Yellow Without 10 ZBA75
Blue Without 10 ZBA76
Set of 10 different colored
caps with different markings
[96]
White, black, green, red, yellow, blue, white “I” on green
background, black “I” on white background, white “O” on
red background, white “O” on black background
10 ZBA79
ZBRM22
ZBRACS XALD02H7
Table 19.194: Boxes for Wireless, Batteryless Push Buttons
Description
For use with:
Marking
Sold in
lots of
Catalog
Number
Mobile box, plastic, empty
[97]
For mobile and fixed applications with
wireless and batteryless push buttons
1 cut-out 1 ZBRM21
2 cut-outs 1 ZBRM22
Support for tube or wall specific for
ZBRM21 and ZBRM22
— 1 ZBRACS
Empty plastic boxes for
wireless and batteryless push
buttons [98]
For fixed or on-board wireless and
batteryless push buttons
1 cut-out 1 XALD01H7
2 cut-outs 1 XALD02H7
XB5R and XB4R Accessories
ZBRA1 ZBRA2
Table 19.195: Accessories
Description
For use with:
Marking
Sold in
lots of
Catalog
Number
External antenna [99]
Between transmitter and
receiver, used to increase the
range and/or get around
obstacles
24 to 240 V
- 5m cable
- 1 power-ON LED
- 2 LEDs
reception/transmission
1 ZBRA1
Mounting collar
–
Plastic 10 ZB5AZ009
Metal 10 ZB4BZ009
Legend plate, 27 x 8 mm,
for engraving
For adhering to handy box
ZBRM01
Self-adhesive, blank,
black background
10 ZBY0101T
External antenna access
point
2 m/6.56 ft cable with 1 RF
connector
Access point (ZBRN1 or ZBRN2) Used to increase the distance of
transmission
ZBRA2
NOTE: The ZBRN2 has embedded communication port for Modbus Serial Line, where as ZBRN1 must be plugged
with a communication module to support different protocols.
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[95] Supplied with output function set to momentary Outputs programmable to maintained and Start-Stop.
[96] Cap can be clipped-in at 90° steps, through 360°.
[97] Cannot be used for wired contacts (no cable gland outlet).
[98] Box equipped with cable gland outlets, compatible with Harmony ZB5 push button heads.
[99] Not wired to the receiver.