Technical Data Bulletin

© 2019 Schneider Electric
All Rights Reserved
19-67
schneider-electric.us
Biometric Switches
22 mm Push Buttons
Refer to Catalog DIA5ED2121212EN
Description
•
The stand-alone biometric switch (XB5S1/XB5S2) consists of a dark gray housing,
with the following on its front face:
– A sensing screen 1 that allows the registration and subsequent recognition of the
registered fingerprints,
– A green LED output state indicator 2 that illuminates when the output is activated
(solid-state N.O. contact),
– An orange LED 3, indicating an administrator’s “Registration” mode,
– An orange LED 4, indicating an operator’s “Registration” mode,
– A red “RESET” LED 5 which indicates, in “Delete” mode, that the administrator is
deleting all or part of the memory,
– A red LED 6 which flashes when the reader is presented with an “unrecognized”
fingerprint or in the event of incorrect operation.
•
The stand-alone USB biometric switch (XB5S3/XB5S4) consists of a dark gray
housing with a sensing screen 1 for fingerprints, a green LED 2 for indicating the
output state, and a red LED 6 for the unrecognized fingerprint on its front face.
•
The USB biometric switch dedicated to Schneider HMI (XB5S5) consists of a dark
gray housing with a sensing screen 1 for fingerprints on its front face.
XB5S1B●●●●
XB5S3B●●●●
Table 19.198: Biometric Switch Catalog Numbers
Description
Connection
Catalog Number
Bistable biometric switch
24 V DC
PNP output
By 2 m/6.56 ft cable
XB5S1B2L2
By M12 connector
XB5S1B2M12
Monostable biometric switch
24 V DC
PNP output
By 2 m/6.56 ft cable
XB5S2B2L2
By M12 connector
XB5S2B2M12
Bistable USB biometric switch
24 V DC
PNP output
By 2 m/6.56 ft cable
XB5S3B2L2
By M12 connector
XB5S3B2M12
Monostable USB biometric
switch
24 V DC
PNP output
By 2 m/6.56 ft cable
XB5S4B2L2
By M12 connector
XB5S4B2M12
USB biometric switch
dedicated to Schneider HMI
24 V DC
By 2 m/6.56 ft cable
XB5S5B2L2
ZB5SZ70
Table 19.199: Accessories
Description
Function
Catalog Number
Protective cover, translucent and
self-adhesive
Protection of sensing screen
ZB5SZ70
Mounting nut, Ø 22 mm/0.866 in. Spare part
ZB5SZ71
Legend plate, 27 x 8 mm/ 1.06 x 0.32
in., self-adhesive, blank, black
background, for engraving
— ZBY0101T
Stainless-steel protective cover
Protects switch from outside
elements and vandalism
ZB5SZ72
ZB5SZ72
19
PUSH BUTTONS AND OPERATOR
INTERFACE