Technical Data Bulletin
© 2019 Schneider Electric
All Rights Reserved
19-73
schneider-electric.us
Type K Heavy Duty Operators
30 mm Push Buttons
Class 9001 / Refer to Catalog 9001CT1103
Table 19.216: 30 mm Multifunction Operators
Description [5]
Color
With 2 N.C. Contacts
(1 KA3, 1 KA5) [6]
With 1 N.O. &
1 N.C. Contact
(1 KA1) [6]
Without
Contacts [6] [7]
Non-Illuminated Push-Pull Mushroom Operators
KR9R94H13
Set Screw Style
3 Position, Plastic Head
1-5/8 in. (40 mm), Screw-0n
Momentary Pull
Maintained Neutral
Momentary Push [8]
Red
Green
Other [9]
KR8RH25
KR8GH25
KR8▼H25
—
—
—
KR8R
KR8G
KR8▼
2 Position, Plastic Head
1-5/8 in. (40 mm), Screw-0n Maintained Pull
Maintained Push [10]
Red [11]
Green
Other [9]
—
—
—
KR9RH13
KR9GH13
KR9▼H13
KR9R
KR9G
KR9▼
2 Position , Plastic Head
1-5/8 in. (40 mm),
Screw-0n Head with Set Screw
Maintained Pull
Maintained Push [10]
Red — KR9R94H13 KR9R94
9001KR9RM94
2 Position,
Metal Head
1-1/2 in. (40 mm) Diameter
Maintained Pull
Maintained Push
Black —
—
9001KR9BM94
Red — 9001KR9RM94
Green — 9001KR9GM94
9001KR9RM95
2 Position,
Metal Head
2-3/8 in. (60 mm) Diameter
Maintained Pull
Maintained Push
Black —
—
9001KR9BM95
Red — 9001KR9RM95
Green — 9001KR9GM95
Description
Color
With 1 N.O. & 1 N.C.
Contact (KA1)
With 2 N.O. & 2 N.C.
Contacts (KA2)
Without Contacts
Non-Illuminated Turn-to-Release Mushroom Operators
9001KR16H2
Trigger Action
2 Position,
Plastic Head
Turn-to-Release
Trigger Action
Red KR16H13 KR16H2 KR16
9001KR9P1
1.625 in. Diameter Knob
For 1-3/8 in. or 2-1/4 in. Diameter Knob [5]
Includes Type KN379
Legend Plate Marked
Pull To Start Push To Stop
Screw-On Plastic Illuminated Push-Pull Mushroom Operators [6] [12] [9]
Description [5] Voltage
With Red Knob
and 2 N.C.
Contacts
(1 KA3, 1 KA5)
With Other
Color Knob and
2 N.C. Contacts
(1 KA3, 1 KA5)
With Other Color
Knob Without
Contacts [7]
3 Position Illuminated
Momentary Pull
Maintained Neutral
Momentary Push[8]
110-120 V, 50-60 Hz
Other—Transformer, LED,
Flashing [13]
Other—Full Voltage,
Resistor, Neon [14]
KR8P1RH25
KR8P▲RH25
KR8P▲RH25
KR8P1▼H25
KR8P▲▼H25
KR8P▲▼H25
KR8P1▼
KR8P▲▼
KR8P▲▼
Description [5] Voltage
With Red[11]
Knob & 1 N.O.
& 1 N.C. Contact
(KA1)
With Other Color
Knob and 1 N.O.
& 1 N.C. Contact
(KA1)
With Other Color
Knob Without
Contacts
2 Position Illuminated
Maintained Pull
Maintained Push
110–120 V, 50–60 Hz
Other—Transformer, LED,
Flashing [13]
Other—Full Voltage,
Resistor, Neon [14]
KR9P1RH13
KR9P▲RH13
KR9P▲RH13
KR9P1▼H13
KR9P▲▼H13
KR9P▲▼H13
KR9P1▼
KR9P▲▼
KR9P▲▼
Table 19.217: Color Codes for 30 mm
Multifunction Operators ▼
Color
KR8, KR9
Black [15]
B
Red R
Green G
Blue L
Yellow Y
White W
Orange [15]
S
Clear C
Amber A
Gray
—
Table 19.218: Contact Sequences
9001 KR8RH1 or H13
Pull Ctr Push
(KA1)
KA3 X O O
KA2 O O X
9001 KR8RH25
KA3 X O O
KA5 X X O
NOTE: To select contact blocks, light modules, and accessories, see Type KA Contact Blocks, page 19-90.
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[5] For 1-3/8 in. or 2-1/4 in. Dia. Knob:
a) Order Type -20 or -21 knob from Additional Accessories for Type K and SK Operators, page 19-99.
b) Order 9001K54 adapter—allows Type -20 or -21 knob to fit on push pull operators. Voids UL and NEMA 6 rating.
c) Can order assembled operator by adding color code to Type -20 or -21. Example: 9001KR9R would be 9001KR9R20 or 9001KR9R21.
[6] When ordering, add prefix 9001 to the catalog number.
[7] These operators can be ordered complete with contact blocks. For maximum block usage, see “H” Codes, page 19-93. Add the chosen “H” number to the end of the operator.
[8] For contact sequences, see Table 19.218 Contact Sequences, page 19-73
[9] ▼ Choose one color from the Color Codes table here, and insert the color code in Type number. Example: KR9 with a yellow knob = KR9Y
[10] For color codes, see Color Codes for 30 mm Multifunction Operators, page 19-73.
[11] To obtain a red knob with “Push Emergency Stop” printed on the red knob—substitute “R05” in place of “R”
[12] ▲ Add the voltage assembly code as chosen from Table 19.273 Standard Light Modules for Types K, SK, and KX Control Units, page 19-91. Example: KR8P with a 277 V 50–60 Hz
voltage = KR8P8.
[13] The knob must be the same color as the LED light module chosen, for example, for a green LED, use a green knob.
[14] On neon light modules, use clear knobs only.
[15] These colors are not available on illuminated push-pull operators.