Technical Data Bulletin

© 2019 Schneider Electric
All Rights Reserved
19-83
schneider-electric.us
Type SK Corrosion Resistant Multifunction
Operators
30 mm Push Buttons
Class 9001 / Refer to Catalog 9001CT1103
30 mm Multifunction Operators UL Types 4, 4X, 13/NEMA 4, 4X, 13
Table 19.249: Non-Illuminated Push-Pull Screw-on Mushroom Operators, Plastic Head[73]
Description
Color
With 2 N.C.
Contacts
(1 KA3, 1 KA5)
With 1 N.O. / 1 N.C.
Contact (1 KA1)
Without Contacts [74]
9001SKR9R
Non-Illuminated
1-5/8 in. Diameter Knob
Includes Type KN179WP
Legend Plate Marked
Pull To Start Push To Stop
3 Position
Momentary Pull-
Maintained Neutral-
Momentary Push [75]
Red
SKR8RH25 — SKR8R
Green
SKR8GH25 — SKR8G
Other [76]
SKR8▲H25 — SKR8▲
2 Position[77]
Maintained Pull-
Maintained Push
Red
— SKR9RH13 SKR9R
Green
— SKR9GH13 SKR9G
Other [76]
— SKR9▲H13 SKR9▲
Table 19.250: Non-Illuminated Turn-to-Release Mushroom Operators[73]
Description
Color
With 1 N.O.
Contact
(KA1)
With 2 N.O. / 2 N.C.
Contacts
(2 KA1)
Without Contacts
9001SKR16H2
2 Position,
Plastic Head
Turn-to-Release
Trigger Action
Red SKR16H13 SKR16H2 SKR16
Table 19.251: Screw-On Plastic Illuminated Push-Pull Mushroom Operators[73]
Illuminated
Description Voltage
With Red Knob and 2 N.C.
Contacts
(1 KA3, 1 KA5) [78]
With Other Color Knob
and 2 N.C. Contacts
[76] [78]
With Other Color
Knob Without
Contacts [74]
[76] [78]
9001SKR9P1
Illuminated
1-5/8 in. Diameter Knob
Includes Type KN179WP Legend
Plate Marked
Pull to Start Push To Stop
3 Position
Momentary Pull-
Maintained Neutral-
Momentary Push [79]
110–120 V, 50–60 Hz
SKR8P1RH25 SKR8P1▲H25 SKR8P1▲
Other—Transformer, LED,
Flashing [80]
SKR8P♦RH25 SKR8P♦▲H25 SKR8P♦▲
Other—Full Voltage, Resistor,
Neon [75]
SKR8P♦RH25 SKR8P♦▲H25 SKR8P♦▲
Description Voltage
With Red [77] Knob and 1
N.O. & 1 N.C. Contact (KA1)
With Other Color Knob
and 1 N.O. & 1 N.C.
Contact (KA1)
[76]
With Other Color
Knob Without
Contacts
[76]
2 Position
Maintained Pull-
Maintained Push
110–120 V, 50–60 Hz
SKR9P1RH13 SKR9P1▲H13 SKR9P1▲
Other—Transformer, L.E.D.,
Flashing [80]
SKR9P♦RH13 SKR9P♦▲H13 SKR9P♦▲
Other—Full Voltage, Resistor,
Neon [75]
SKR9P♦RH13 SKR9P♦▲H13 SKR9P♦▲
Table 19.252: Color Codes
Color
SKR11, SKR12 SKR8, SKR9
Black [81]
B B
Red R R
Green G G
Blue L L
Yellow Y Y
White W W
Orange [81]
S S
Clear — C
Amber — A
Gray
E —
Table 19.253: Positions for 9001SKR8RH1 or H13
9001SKR8RH1 or H13
PULL CTR PUSH
(KA1)
KA3 X O O
KA2 O O X
Table 19.254: Positions for 9001SKR8H25
9001SKR8H25
PULL CTR PUSH
KA3 X O O
KA5 X X O
KA2 O O X
NOTE: To select and order Contact Blocks, Light Modules, Knobs, and Accessories, see Type KA Contact Blocks, page 19-90 through
Hermetically Sealed Power Reed Contact Blocks, page 19-92.
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[73] When ordering, add prefix 9001 to the catalog number.
[74] These operators can be ordered complete with contact blocks. For maximum block usage, see “H” Codes, page 19-93. Add the chosen “H” number to the end of the operator.
[75] On neon light modules, use clear knobs only.
[76] ▲ See Table 19.252 Color Codes, page 19-83 and insert the color code in the Type number. Example: SKR9( ) with a yellow knob = SKR9Y
[77] To obtain a red knob with “Push Emergency Stop” printed on the red knob—substitute “R05” in place of “R”
[78] ♦ Add the voltage assembly code as chosen from Standard and Shallow Depth Light Modules, page 19-91. Example: SKR8P♦ with 277 V 50–60 Hz = SKR8P8
[79] For positions, refer to Table 19.253 Positions for 9001SKR8RH1 or H13, page 19-83 and Table 19.254 Positions for 9001SKR8H25, page 19-83.
[80] The knob must be the same color as the LED light module chosen, for example, for a green LED, use a green knob.
[81] These colors are not available on illuminated push-pull operators.