Technical Data Bulletin
© 2019 Schneider Electric
All Rights Reserved
19-85
schneider-electric.us
9001SK Corrosion Resistant Selector
Switches
30 mm Push Buttons
Class 9001 / Refer to Catalog 9001CT1103
9001SK 2-Position Selector Switches
Table 19.257: 2-Position Selector Switches
Contact Block Required
1—Contact Closed
0—Contact Open
Contact Block Position
Quantity and Type
KA1 or KA2 or KA3
Mount on Side
KA1 or KA2 or KA3
Left
Right
Left
Right
Top View
Side 2
Side 1
Operator
Locating
Notch
KA1
or
KA3
KA1
#2
or
KA3
#2
1 0 0 1
KA2
KA2
#2
0 1 1 0
KA1
or
KA3
KA1
#1
or
KA3
#1
1 0 0 1
KA2
KA2
#1
0 1 1 0
For Cam, see Type K, KX, and SK Selector Switch Guide, page 19-78
E D
Non-Illuminated Operators Type [89] Type [89]
Manual Return[90], Operator Only (without contact blocks)
Without Knob SKS11 SKS12
With Knob [91]
SKS11♦ SKS12♦
Operator with Contact Blocks and Standard black knob
With 1 KA1 on Side #2 SKS11BH13 —
With 1 KA1 on Side #1 SKS11BH1 —
With 1 KA1 on Side #1 and 1 KA1 on side #2 SKS11BH2 —
Spring Return from Left [90], Operator Only (without contact blocks)
Without Knob SKS25 —
With Knob [91]
SKS25♦ —
Spring Return from Right [90], Operator Only (without contact blocks)
Without Knob — SKS34
With Knob [91]
— SKS34♦
Illuminated Operators Type [89] Type [89]
Manual Return [90], Operator Only (without contact blocks)
Without Knob, 110-120V 50-60 Hz Transformer
SK11J1 SK12J1
With Standard Red Knob, 110-120V 50-60 Hz Transformer
SK11J1R SK12J1R
With other Color Knob [91]and other Voltage Light Module [92]
SK11J■♦ SK12J■♦
Spring Return from Left [90], Operator Only (without contact blocks)
Without Knob, 110-120V 50-60 Hz Transformer
SK25J1 —
With Standard Red Knob, 110-120V 50-60 Hz Transformer
SK25J1R —
With other Color Knob [91]and other Voltage Light Module [92]
SK25J■♦ —
Spring Return from Right [90], Operator Only (without contact blocks)
Without Knob, 110-120V 50-60 Hz Transformer
— SK34J1
With Standard Red Knob, 110-120V 50-60 Hz Transformer
— SK34J1R
With other Color Knob [91]and other Voltage Light Module [92]
— SK34J■♦
70
2 Position
Table 19.258: Selector Switch Assembly Code and Knob Cat. No.
Color
Standard Knob Gloved Hand Knob
Knob Code
Cat. No. [89]
Knob Code
Cat. No. [89]
Black B B11 FB B25
Red R R8 FR R24
Green G G8 FG G24
Yellow Y Y8 FY Y24
Blue L L8 FL L24
White W W8 FW W24
Amber A A8 FA A24
Clear C C8 FC C24
Contact Blocks: Contact Blocks, page 19-90,Hermetically Sealed Logic Reed Contact Blocks, page 19-92,
Hermetically Sealed Power Reed Contact Blocks, page 19-92
Light Modules:Standard Light Modules, page 19-91
Knobs and Accessories:Additional Accessories for Type K and SK Operators, page 19-99
19
PUSH BUTTONS AND OPERATOR
INTERFACE
[89] When ordering, add prefix 9001 to the catalog number.
[90] These operators can be ordered complete with contact blocks. For maximum block usage, see “H” Codes, page 19-93. Add the chosen “H” number to the end of the operator.
[91] ♦ Add the knob color code chosen from Table 19.258 Selector Switch Assembly Code and Knob Cat. No., page 19-85. For LED, knob color must match LED.
[92] ■ Add the voltage assembly code as chosen from Standard Light Modules, page 19-91. Example: K25J with 208Vac = K25J3