Brochure

82
Control and signaling units
Harmony XB5, plastic
Body/contact assemblies - Faston connectors
References
To combine with heads,
see pages
24 to 76
Contact functions (1)
Faston connectors (6.35 or 2 x 2.8 mm/0.250 or 2 x 0.110 in.)
Contacts for standard applications
Description Type of
contact
Sold in
lots of
Unit
reference
Weight
kg/lb
NO NC
Contact blocks Single 1 – 5 ZBE1013 0.011/0.024
– 1 5 ZBE1023 0.011/0.024
Double 2 – 5 ZBE2033 0.020/0.044
– 2 5 ZBE2043 0.020/0.044
1 1 5 ZBE2053 0.020/0.044
Single with
body/xing
collar
1 – 1 ZB5AZ1013 (2) 0.021/0.046
– 1 1 ZB5AZ1023 (2) 0.021/0.046
2 – 1 ZB5AZ1033 0.030/0.066
– 2 1 ZB5AZ1043 0.030/0.066
1 1 1 ZB5AZ1053 0.030/0.066
Contacts for specic applications
Application Type of
contact
Description Sold in
lots of
Unit
reference
Weight
kg/lb
NO NC
Low power switching Single Standard 1 – 5 ZBE10163 (2) 0.012/0.026
– 1 5 ZBE10263 (2) 0.012/0.026
Dusty
environments (3)
(IP 5X, 50 μm
dust)
1 – 5 ZBE1016P3 (2) 0.012/0.026
– 1 5 ZBE1026P3 (2) 0.012/0.026
Staggered contacts Single Early make
1 – 5 ZBE2013 (2) 0.011/0.024
NO
Late break
– 1 5 ZBE2023 (2) 0.011/0.024
NC
High power switching Single Standard
(4)
1 – 1 ZBE5013 0.021/0.046
– 1 1 ZBE5023 0.021/0.046
2 – 1 ZBE5033 0.033/0.073
– 2 1 ZBE5043 0.033/0.073
1 1 1 ZBE5053 0.033/0.073
Clip-on legend holder for electrical blocks with screw clamp terminal
connections (5)
For use with Sold in lots of Unit reference Weight
kg/lb
Identication of an XB5A control or signaling unit 10
ZBZ001 0.001/0.002
Sheet of 50 blank legends
Legend holder ZBZ001 10
ZBY001 0.023/0.051
(1) The contact blocks enable variable composition of body/contact assemblies. Maximum number of rows possible:
3. Either 3 rows of 3 single contacts or 1 row of 3 double contacts + 1 row of 3 single contacts (double contacts
occupy the rst 2 rows).
(2) To order products with screw clamp terminal connections for lugs, replace the 3 at the end of the reference with a
9. Example: ZBE1013 becomes ZBE1019.
(3) It is not possible to t an additional contact block on the back of these contact blocks.
(4) It is not possible to use these contacts with light blocks.
(5) This legend holder is not compatible with high power switching contacts .
ZBE1023
PF080708
ZBE2043
PF080709
ZBE5043
PF080710
Presentation:
page 10
XB5_633_CDDPM18024
ZBZ001