Information

Manufacturing
Installation
Use
37%
Manufactured at a Schneider Electric production site ISO14001 certified
Distribution
Weight and volume of the packaging optimized, based on the European Union's packaging directive
Packaging weight is 8.5 g, consisting of cardboard (99.2%), Paper (0.8%)
Additional environmental information
The Complete Illuminated Plastic Button and Switch presents the following relevent environmental aspects
XB5AW34B5 does not require any installation operations.
The product does not require special maintenance operations.
End of life
End of life optimized to decrease the amount of waste and allow recovery of the product components and materials
This product contains Plastic parts with brominated FR (4.78g) that should be separated from the stream of waste so
as to optimize end-of-life treatment.
The location of these components and other recommendations are given in the End of Life Instruction document which
is available on the Schneider-Electric Green Premium website
http://www2.schneider-electric.com/sites/corporate/en/products-services/green-premium/green-premium.page
Recyclability potential:
Based on “ECO’DEEE recyclability and recoverability calculation method”
(version V1, 20 Sep. 2008 presented to the French Agency for Environment
and Energy Management: ADEME).
Use scenario
The product is in ON mode 30% of the time with a power use of 0.5W and in OFF mode 70% of the time with
no power use, for 20 years
Environmental impacts
Reference life time
20 years
Product category
Passive products - non-continuous operation
Installation elements
No special components needed
Electricity grid mix; AC;
consumption mix, at
consumer; < 1kV; EU-27
Electricity grid mix; AC;
consumption mix, at
consumer; < 1kV; EU-27
Electricity grid mix;
AC; consumption mix,
at consumer; < 1kV;
EU-27
Geographical
representativeness
Europe
Technological
representativeness
Illuminated complete plastic unit with contact function. It combines simplicity of installation, flexibility, and
robustness. It meets the requirements of the majority of industrial applications.
Energy model used
Manufacturing
Installation
Use
End of life
Energy model used: France
ENVPEP1710010EN_V1 11/2017