Manual

Installation
EIO0000000046 04/2013 15
EMC Compatibility
Product Compliance
This product complies with the European directive 89/336/CEE on "electromagnetic
compatibility".
The products described in this manual meet all the electromagnetic compatibility
(EMC) conditions and are compliant with the applicable standards. To maintain
electromagnetic compatibility in each particular end use application, the system
designer must utilize EMC compliant and certified components and follow
manufacturers instructions, work practices and applicable codes and standards
related to EMC compliant installations.
The product described in this manual contains highly complex semiconductors that
can be damaged or destroyed by electrostatic discharge (ESD). Care must be taken
to avoid product damage from ESD. For example, the use of this product within the
vicinity of devices rated as class A or B according to IEC 61000-4-4, may result in
damage to this device. The effects of ESD damage, including the possibility of
unintended equipment operation, may not be immediately detectable.
WARNING
UNINTENDED EQUIPMENT OPERATION
Where there is a risk of electromagnetic interference, the system designer must
implement the protective measures:
 Do not expose electronic circuits to sources of Electrostatic Discharge.
 Avoid touching internal circuits with skin, clothing, or tools.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.