Manual

PROFIBUS Network Interface
EIO0000000046 04/2013 25
Address Configuration / Transmission Speed
Method
Follow the steps described below:
Rotary Switches
Step Action
1 Switch off the Splitter Box.
2 Unscrew the four screws on the cover and remove it.
3 Set the splitter box address using the rotary switches.
4 Screw the cover back on (0,5...3 Nm (4.4...26.5 lb-in)).
WARNING
EQUIPMENT DAMAGE
 Turn off power supplying the Splitter Box before opening the cover.
 Do not touch electrical circuit components contained in the Splitter Box.
Failure to follow these instructions can result in death, serious injury, or
equipment damage.
Element Function
1 Node-ID x 10 rotary switch
2 Node-ID x 1 rotary switch
