Manual
Table Of Contents
- ENGLISH
- FRANCAIS
- 1 Mise en oeuvre matérielle
- 2 Mise en oeuvre logicielle
- 3 Protocoles Modbus et Ethernet TCP/IP Modbus
- 3.1 Généralités
- 3.2 Exemples d’application
- 3.2.1 Montage
- 3.2.2 Configuration matérielle de l’automate avec PL7 PRO (V4.3 ou supérieure)
- 3.2.3 Exemple de programmation d’une requête pour la station @ 2
- 3.2.4 Configuration de l’automate avec Unity PRO XL V1.0.1
- 3.2.5 Lecture de 5 mots dans l’étiquette à partir de mot %MW 0 de l’étiquette dans la station @ 2
- 4 Diagnostic
- 5 Glossaire
Hardware setup
10
English
W916556680111
Presentation
General
This box is used to connect up to three XGCS compact stations on an Ethernet
network.
Data is exchanged with the Ositrack stations using the Modbus TCP/IP protocol.
As a server on the network, the splitter box can receive and respond to data
messages.
This data exchange enables your network to access certain Ositrack station
functions, such as:
• Reading/writing tags
• Control and command
• Monitoring
• Diagnostics
It is recommended that you also refer to the RFID Compact Station Catalog
DIA4ED2140601EN.