Manual

21
Software setup
English
W916556680111
Assigning an IP address by ARP and Telnet
This method is recommended for configuring the splitter box IP address from a
PC. The splitter box IP address must be configured for the network connection to
be available.
In this case, it is necessary to have a fixed IP address. The network administrator
is generally responsible for allocating IP addresses. You must have the following
information available before starting to configure your splitter box:
The PC must:
• be connected to the same network as the splitter box (or connected directly
to the splitter box via a cross-over cable)
• have the TCP/IP protocol installed
• have a fixed IP address
• have a subnet mask compatible with the IP address that will be assigned to
the splitter box (see section )
IP address: ___ ___ ___ ___
Gateway: ___ ___ ___ ___
Subnet mask: ___ ___ ___ ___
TCS ECL1M3MS2
499NES100
24V
Ositrack
PI
scitsongaiD
sutatS
ytivitca .htE
01/ spbM 001
rewoP
SWITCH