Manual
Table Of Contents
- ENGLISH
- FRANCAIS
- 1 Mise en oeuvre matérielle
- 2 Mise en oeuvre logicielle
- 3 Protocoles Modbus et Ethernet TCP/IP Modbus
- 3.1 Généralités
- 3.2 Exemples d’application
- 3.2.1 Montage
- 3.2.2 Configuration matérielle de l’automate avec PL7 PRO (V4.3 ou supérieure)
- 3.2.3 Exemple de programmation d’une requête pour la station @ 2
- 3.2.4 Configuration de l’automate avec Unity PRO XL V1.0.1
- 3.2.5 Lecture de 5 mots dans l’étiquette à partir de mot %MW 0 de l’étiquette dans la station @ 2
- 4 Diagnostic
- 5 Glossaire
5
Safety Information
English
W916556680111
Important Information
NOTICE
Read these instructions carefully, and look at the equipment to become familiar
with the device before trying to install, operate, or maintain it. The following special
messages may appear throughout this documentation or on the equipment to
warn of potential hazards or to call attention to information that clarifies or
simplifies a procedure.
The addition of this symbol to a Danger or Warning safety label indicates
that an electrical hazard exists, which will result in personal injury if the
instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal
injury hazards. Obey all safety messages that follow this symbol to avoid
possible injury or death.
DANGER indicates an imminently hazardous situation, which, if not avoided,
will result in death or serious injury.
DANGER
WARNING indicates a potentially hazardous situation, which, if not avoided,
can result in death, serious injury, or equipment damage.
WARNING
CAUTION indicates a potentially hazardous situation, which, if not avoided,
can result in injury or equipment damage.
CAUTION
Safety Information