Schneider Electric XW-MPPT-60 User Manual

Configuration Settings
975-0400-01-01 Revision H B–9
This manual is for use by qualified personnel only.
Figure B-7 Configuration Menus (Advanced)
Advanced Settings
Device Info
[MPPT 02]
Multi
[MPPT]
[01]
Chgr
[Flooded]
[200Ah]
[100%]
[3-Stage]
[50.0V]
[120min]
[Warm]
[48.0V]
Input
[Disabled]
[100.00V]
Aux
[Off]
[ActiveHigh]
[12V]
[LowBattV]
[42.0V] [1 sec] [48.0V] [1 sec]
Conn
[SolarArray1]
[Unknown]
Custom Battery
[Off]
[64.0V] [57.6V] [57.6V] [54.0V]
[108mV/K]
MPPT60 01: Setup
Advanced Settings
[Bulk]
[Disabled]
[Operating]
Meters
215W
2.1A 100.5V
210W
3.7A 57.4V
3.5Ah 0.20kWh
0.1kAh 5kWh
20C
Float
AuxOff
“MPPT Ref Volts” can be changed only when “MPPT AutoTrack” is disabled.
975-0400-01-01_Rev-H(XW-MPPT60-150).book Page 9 Thursday, November 23, 2017 11:48 AM