Schneider Electric XW-MPPT-60 User Manual

Conext System Control Panel Menus
B–10 975-0400-01-01 Revision H
This manual is for use by qualified personnel only.
Monitoring the Charge Controller
You can monitor solar charge controller operation on the SCP by viewing the:
• solar charge controller Home screen
• solar charge controller Meters screen
Charge Controller Home Screen
The solar charge controller Home screen displays real-time operational data
specific to the solar charge controller.
To view the solar charge controller Home screen:
◆ From the System Home screen, press the down arrow until the solar charge
controller Home screen appears.
To return to the System Home screen:
◆ Press the Exit button, as indicated by the “system” arrow on the solar charge
controller Home screen.
The solar charge controller Home screen features a “setup” arrow pointing to the
Enter button and a “system” arrow pointing to the Exit button. Pressing Enter
takes you to the solar charge controller Setup menu. Pressing Exit takes you to
the System Home screen.
Pressing the down arrow button takes you to the Home screens for the other
Xanbus-enabled devices in the system.
Figure B-8 Charge Controller Home Screen
setup system
MPPT60 01: Home
-2.9A
166W 57.5V
Float
206Wh 3Ah
Top Line: Model #, device number
Line 1: Output current to batteries
Line 2: Output power, battery voltage
Line 3: Charge State
Line 4: Output since last sleep period
975-0400-01-01_Rev-H(XW-MPPT60-150).book Page 10 Thursday, November 23, 2017 11:48 AM