Schneider Electric XW-MPPT-60 User Manual

Operation
4–2 975-0400-01-01 Revision H
This manual is for use by qualified personnel only.
Viewing Operating Status
The Conext MPPT Solar Charge Controller (solar charge controller) has four
buttons and a 2-line, 16 character liquid crystal display (LCD) for configuration
and displaying system information and operating status.
• When in Charge Control mode the LCD shows the output power, voltage and
current (and additional information as shown in Figure 4-1).
• When a fault condition exists, the LCD shows “Fault Active.”
• When battery equalization is taking place, the LCD shows “Equalization
Pending” (when bulk/absorption charging prior to equalization) and “mm:ss
remaining” while applying the equalization charge.
LCD Screens and What They Mean
The front panel display shows different message screens during startup and
normal operations. Figure 4-1 shows the sequence in which the Startup and
Operating screens are displayed or can be viewed.
All of these message screens are described in more detail in the following
sections.
975-0400-01-01_Rev-H(XW-MPPT60-150).book Page 2 Thursday, November 23, 2017 11:48 AM