Schneider Electric Owner's Guide

Operation
3–2 975-0560-01-01 G
Viewing Status Information on the Charge Controller
The charge controller has three LEDs for displaying basic operating information.
They are Charging (green), Event (red), and Equalize (orange).
Figure 3-1 Charge controller status LEDs
Table 3- 1 Charge controller status LEDs
LED Description
Charging
(Green)
• Solid when the charge controller is connected to a battery,
providing visual feedback that the charge controller is powered
on.
• Flashing at a variable rate when the charge controller is
charging a battery. Slow flashing indicates a low charge rate,
and fast flashing indicates a faster charge rate.
Event
(Red)
• Solid when the charge controller has detected an error or fault
condition.
• Flashing at a constant rate when the charge controller has
detected a warning condition.
View the error, fault, or warning and its description on the SCP.
Event
!
Equalize
Charging
Event
!
Equalize
Charging
975-0560-01-01(XW-MPPT80-600_Ops).book Page 2 Wednesday, November 22, 2017 5:52 PM