Schneider Electric Owner's Guide

Viewing Fault, Error, and Warning Logs
975-0560-01-01 G 3–11
Viewing Fault, Error, and Warning Logs
The SCP displays fault, error, and warning logs stored on the charge controller.
• To view the fault and error logs, go to Setup > View Device Info > View Fault
Log.
• To view the warning logs, go to Setup > View Device Info > View Warning
Log.
Press the down arrow to view all the entries in the log. The entries are listed
chronologically, with the most recent fault, error, or warning at the top of the list.
The fault, error, or warning number, date, and time are displayed. Press Enter to
view details for a particular entry, including the name. The twenty most recent
entries are stored.
Figure 3-2 Over Voltage Protection
600
610
620
580
590
550
560
570
PV Input
Voltage
(Volts)
Vpv Error Level
Vpv Clear Level
530
540
500
510
520
-50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80
Heat Sink Temperature (Celsius)
Table 3- 7 History menu items
SCP Device
Menu Item Description
Setup >
View Device Info
View Fault Log Displays a log of the faults and errors.
Setup >
View Device Info
View Warning Log Displays a log of the warnings.
975-0560-01-01(XW-MPPT80-600_Ops).book Page 11 Wednesday, November 22, 2017 5:52 PM