Schneider Electric Owner's Guide

Conext Config Tool
975-0560-01-01 G A–7
Conext Config Tool
The Conext Config Tool (Part Number 865-1155) is a commissioning tool used for
configuring or upgrading a Conext system. The Config Tool is available to
installers only by request. Contact customer service for more information.
Regulatory Approvals
Certified to UL 1741 and to CSA 107.1 and carries the c(CSA)us mark.
EMC - North America:
• FCC Part-15 sub part B, Class B
• Industry Canada ICES-003, Class B
CE Marked and complies with the following:
Low Voltage Directive 2006/95/EC, per:
• EN50178
Electronic Equipment for Use in Power Installations.
EMC Directive 2004/108/EC, per:
• EN61000-6-3 Emission standard for residential, commercial, and light-
industrial environments
• EN61000-6-1 Immunity for residential, commercial, and light-industrial
environments
Australia:
• C-tick marked
975-0560-01-01(XW-MPPT80-600_Ops).book Page 7 Wednesday, November 22, 2017 5:52 PM