Schneider Electric Owner's Guide

Using the SCP
975-0560-01-01 G B–5
Viewing the Select Device Menu
The Select Device menu is where you select a Xanbus-enabled device to
monitor or configure. The number of items on the Select Device menu
depends on how many devices are installed in your system.
To view the Select Device menu:
◆ On the System Status screen, press Enter.
Viewing the Setup Menu
On the Select Device menu, select the charge controller to view and change
its settings.
To select the charge controller from the Select Device menu:
1. Press the down arrow button to highlight XW MPPT80 xx, where xx is the
device number.
2. Press Enter.
The Setup menu appears.
NOTE
You can identify the System Status home screen by the menu arrow in the
bottom left corner of the screen. The menu arrow indicates the Enter button on
the SCP, which you press to view the Select Device menu.
Figure B-3 Selecting the unit
Select Device
XW MPPT80 01
975-0560-01-01(XW-MPPT80-600_Ops).book Page 5 Wednesday, November 22, 2017 5:52 PM