Schneider Electric Owner's Guide

Conext System Control Panel Menus
B–10 975-0560-01-01 G
Monitoring the Unit
You can monitor the charge controller’s operation on the SCP by viewing the:
• Home screen
• Meters screen
Home Screen
The charge controller’s Home screen displays real-time operational data specific
to the charge controller.
To view the charge controller’s Home screen:
◆ From the System Status screen, press the down arrow until the charge
controller’s Home screen appears.
To return to the System Status screen:
◆ Press the Exit button.
The charge controller’s Home screen features a setup arrow pointing to the Enter
button and a system arrow pointing to the Exit button. Pressing Enter takes you
to the charge controller’s Setup menu. Pressing Exit takes you to the System
Status screen.
Pressing the down arrow button takes you to the home screens for the other
Xanbus-enabled devices in the system.
Figure B-8 Home screen
setup system
XW MPPT80 01: Home
-2.9A
166W 57.5V
Float
206Wh 3Ah
Top Line: Model #, device number
Line 1: Output current to batteries
Line 2: Output power, battery voltage
Line 3: Charge State
Line 4: Output since last sleep period
975-0560-01-01(XW-MPPT80-600_Ops).book Page 10 Wednesday, November 22, 2017 5:52 PM