Schneider Electric Owner's Guide

Index
975-0560-01-01 G IX–3
clearing faults, errors, or warnings
3–6
Max Chg Rate setting
2–5
maximum power point tracking
maximum power point curve
1–3
overview
1–3
voltage range
A–3
mechanical specifications
A–5
messages
errors
3–7
faults
3–6
warnings
3–9
meters screen
B–11
Mode setting
2–16
monthly logs
3–12
MPPT AutoTrack setting
2–10
MPPT Ref Volts setting
2–10
MPPT.
See maximum power point tracking
multiple units, copying settings
2–17
N
NetPS Night Dis setting 2–19
nighttime tare losses
2–19
no float charging stage
1–6, 3–4
not charging, charging stage
3–4
O
Operating mode 2–16
operating mode, configuring
2–16
orange LED
3–3
output power versus ambient temperature
A–6
P
peak power tracking, configuring 2–10
power supplies, disabling at night
2–19
PV In setting
2–10
R
radio reception interference ix
reception interference
ix
ReCharge Volts setting
2–5
red LED
3–2
regulatory approvals
A–7
resetting to factory defaults
2–19, B–8
Restore Defaults setting
2–19
S
safety information
batteries
viii
SCP.
See Conext System Control Panel
settings
Absorb Time
2–5
Absorb Voltage
2–8
Batt Capacity
2–5
Batt Temp
2–6
Batt Type
2–5
Batt Voltage
2–5
BattTempComp
2–8
Bulk Voltage
2–8
Charge Cycle
2–6
Clear Delay
2–13
Clear Level
2–13
Copy from
2–17
DC Conn
2–4
Default Batt Temp
2–6
Dev Number
2–16
Eqlz Support
2–7
Eqlz Voltage
2–8
Equalize
2–4
F/W Rev
2–16
Float Voltage
2–8
Force Chg
2–5
Lo Pwr at Night
2–19
Manual Aux
2–11
Max Chg Rate
2–5
Mode
2–16
MPPT AutoTrack
2–10
MPPT Ref Volts
2–10
NetPS Night Dis
2–19
PV In
2–10
ReCharge Volts
2–5
Restore Defaults
2–19
Trig Src
2–12
Trigger Delay
2–13
Trigger Level
2–12
shade tolerance
1–3
specifications
electrical
A–2
mechanical
A–5
Standby mode
2–16
status information
charge stages
3–4
Conext System Control Panel
3–3
LEDs
3–2
normal operation
3–3
unit
3–2
stopping battery equalization
3–15
T
tare losses, reducing 2–19
television reception interference
ix
three-stage charge controlling
1–4
975-0560-01-01(XW-MPPT80-600_Ops).book Page 3 Wednesday, November 22, 2017 5:52 PM