Conext Automatic Generator Start Installation

Preparing an Installation
975-0307-01-01 2–3
Routing the Connections
Connection
Types
Because the Xantrex XW AGS will be part of a Xantrex Xanbus system, it
is necessary to consider how to route two types of connections:
• connections to the generator, thermostats, and other external
devices and switches, using the included 20-contact connector and
wiring harness.
• connections to other Xantrex Xanbus-enabled devices, using
network cables.
WARNING: Explosion Hazard
This equipment is not ignition protected. To prevent fire or explosion, do
not install the Xantrex XW AGS in locations that require ignition-protected
equipment. This includes any space containing gasoline-powered
machinery, fuel tanks, as well as joints, fittings, or other connections
between components of a fuel system.
Follow all relevant instructions exactly before installing or using your
Xantrex XW AGS.
WARNING: Shock and Energy Hazards
Before making any connections to the generator, ensure that the
generator’s starter is disabled and the generator’s start battery is
disconnected.
Figure 2-5 Xantrex XW AGS External Connections
Wiring harness (connection
to generator, thermostats,
and external switches)
Network cables to other
Xantrex Xanbus-enabled
devices
20-contact
connector
Network ports