Conext Automatic Generator Start Installation

Installation

2–24 975-0307-01-01

Connecting the Thermostats (optional)

Wires 1, 2, 3, and 4 on the wiring harness can be connected to two

thermostats. Wires 1 (yellow) and 2 (gray) are intended for thermostat 1

and wires 3 (orange) and 4 (gray) are intended for thermostat 2.

These wires connect to 12-volt/24-volt output signals from the

thermostats. The Xantrex XW AGS will start the generator in response to

these signals. Thermostats can not be programmed using the Xantrex

XW AGS.

For specific information about thermostat wiring and where Xantrex XW

AGS connections should be made, please consult your thermostat

documentation or contact the thermostat manufacturer.

Crank retry time

0 s

Gen Cool Down

30 s

Gen Spin Down

600 s

Shutdown bypass time

0 s

Start tries

Table 2-18 Type 14 Relay and Timing Preset Configurations

Relay Function Preset Configuration Setting

Table 2-19 Wiring for Connecting Thermostats

Wire

Number Function

Wiring Harness

Wire Color

1 Thermostat 1 input (12/24 V) Yellow

2 Thermostat 1 return (ground) Gray

3 Thermostat 2 input (12/24 V) Orange

4 Thermostat 2 return (ground) Gray