Conext Automatic Generator Start Installation

Installation
2–30 975-0307-01-01
• A second network cable
• A network terminator (when the Xantrex XW AGS is the last device at
one end of the network).
Verifying Power Is Available
When the Xantrex XW AGS has been installed properly, the Power and
Network indicator lights illuminate.
If one or both lights are out, check the network connections. Check the
Xantrex XW Inverter/Charger to ensure it has battery power. Check to
make sure the other devices in the network, such as the Xantrex XW
System Control Panel, are responding to confirm the network is still
active.
Figure 2-26 Connecting the Xantrex XW System Control Panel
Connect one or two network
cables as required by the
installation configuration.
Figure 2-27 Verifying Power is Available
Verify Power and Network indicator
lights are illuminated.