Conext Automatic Generator Start Installation

Configuration
3–10 975-0307-01-01
Gen Type
Full name Generator Type
Purpose “Gen Type” selects the starting requirements of the generator. The
starting requirements determine how the Xantrex XW AGS must be wired
to the generator’s starting system. For more information, see “Connecting
the Generator” on page 2–8 or Appendix B.
Important: “Gen Type” can only be changed after the system is put into
Standby. See “Putting the Xantrex XW AGS in Standby Mode” on
page 4–6.
Table 3-22 Generator Type Descriptions
Option
Description
Mode
For Technical Details, see...
1
1.See Appendix C, “Relay Timing” for additional information.
Type 1 GlowStop page 2–10
Type 2 GlowStop with no preheat page 2–11
Type 3 GlowStop with shutdown bypass page 2–12
Type 4 StartStop with Relay 3 prime page 2–13
Type 5 StartStop with Relay 3 preheat page 2–14
Type 6 GlowStop with normally closed RunStop contact page 2–15
Type 7 Run with preheat page 2–16
Type 8 Run with no preheat page 2–17
Type 9 StartStop with Relay 3 preheat and shutdown
bypass
page 2–18
Type 10 StartStop page 2–19
Type 11 MomentaryRun page 2–20
Type 12 GlowStop with no preheat page 2–21
Type 13 PulseStop with Relay 3 preheat page 2–22
Type 14 Run with no preheat and no switched B+
requirement
page 2–23