Conext Automatic Generator Start Installation

Configuration
3–32 975-0307-01-01
Multi-unit Config
“Multi-unit Config” provides the means to identify multiple units within the
same configuration.
Dev Name
The “Dev Name”, or Device Name, menu item gives each Xantrex
Xanbus-enabled device a unique identifiable name. This makes each
device easier to identify when multiple Xantrex Xanbus-enabled devices
are connected together. The default Device Name for the Xantrex XW
AGS is “Xantrex XW AGS.”
See the Xantrex XW Inverter/Charger Operator’s Guide for additional
information.
Dev Number
The “Dev Number”, or Device Number, menu item gives each Xantrex
Xanbus-enabled device a unique identifiable number in addition to the
name. This provides the means to use the same name, but different
numbers for similar devices (such as Xantrex XW AGS 01 and Xantrex
XW AGS 02).
See the Xantrex XW Inverter/Charger Operator’s Guide for additional
information.
Connections
The “Connections” menu item identifies the AC and DC input and output
sources that affect or control the system (Xantrex XW AGS). Start and
stop triggers such as DC Voltage, charge stage, and AC load current,
are related to these settings.
DC Conn The “DC Conn” (DC connection) must be set to match that of the Xantrex
XW Inverter/Charger(s) in the system. This tells the Xantrex XW AGS
which battery bank to use for the charger based triggers. Configuration
of this parameter is only necessary for systems with more than one
Xantrex XW Inverter/Charger and more than one battery bank.
AC In The “AC In” connection tells the Xantrex XW AGS what other AC source
or grid the Xantrex XW Inverter/Charger is connected to. The Xantrex XW
AGS uses this setting to stop the generator once the Xantrex XW Inverter/
Charger transfers from the generator to the grid or alternative AC source.
Configuration of this parameter is only necessary for larger systems with
multiple Xantrex XW Inverter/Chargers and multiple grid connections.