Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Associations Menu
Item Default Range Step Size
AC1 Association
(Grid)
Grid 1
None
Grid 1-10
Generator 1-10
n/a
AC2 Association
(Generator)
Generator 1
None
Generator 1-10
Grid 1-10
n/a
AC Output
Association (Loads)
AC Load 1 AC Load 1-10 n/a
Battery Association
House Battery Bank
1
House Battery Bank 1-5 n/a
Advanced Features Menu
Item Default Range Step Size
Remote Power Off
Disabled Enabled/Disabled n/a
Power Save
Disabled Enabled/Disabled n/a
Sell Delay 40 sec
Disabled Enabled/Disabled n/a
Generator Support
Plus
Disabled Enabled/Disabled n/a
AC Coupling
Enabled Enabled/Disabled n/a
Battery Energy
Balance
Disabled Enabled/Disabled n/a
Peak Load Shaving
Delay
Disabled Enabled/Disabled n/a
External Transfer
Contactor
Disabled Enabled/Disabled n/a
External Load
Switch
Disabled Enabled/Disabled n/a
For an explanation of these features, see "Advanced Features" on page87.
Advanced Device Settings Menu
Item Default Range Step Size
Periodic Transmit
Enable
Enabled Enabled/Disabled n/a
Identify Enable
Disabled Enabled/Disabled n/a
Defaults Conext XW Pro Owner's Guide
990-91227A-01 This document is intended for use by qualified personnel 191