Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Monitoring the Conext XW Pro
Operation of the Conext XW Pro can be monitored using the factory-installed inverter
information panel or the optional Conext Gateway. To configure the Conext XW Pro,
operators must use the Conext Gatewayand service personnel can use the Config Tool
or Conext Gateway.
Conext XW Pro Information Panel
The Conext XW Pro information panel features:
n Buttons for Conext XW Pro Startup/Shutdown/Standby control, clearing faults and
warnings, and battery equalization.
n A three-character display to indicate power output, charge current, anti-islanding
countdown or troubleshooting information.
n LEDs to indicate AC input status, output status, battery condition, and system
warnings/faults.
Figure 9 Conext XW Pro Information Panel
Symbol Description
AC input status.
Second AC input status.
Event status.
Equalizing status.
Battery level of charge.
STARTUP/SHUTDOWN button.
Charging status.
Inverting status.
Introduction Conext XW Pro Owner's Guide
990-91227A-01 This document is intended for use by qualified personnel 31