Conext XW PRO 6848 6,800W 48V Installation

Setting the Time and Date
Conext XW Pro advanced features such as peak load shaving, charger block, and time-
stamped events (faults, warnings, and logged historical data) require that the system be
set to the correct time. The Conext Gateway has an internal clock that controls the time
for the Xanbus-enabled devices in the system. You can set the time, time format, and
date on the Clock menu. TheTime Setup menu is accessible under
Configuration in the Conext Gateway Setup Screen where the time zone,
time, and date are adjustable.
For more information, see “Changing the Time” in the Conext Gateway Owner’s Guide.
Conext XW Pro Configuration Page
The Conext XW Pro device's configurable operating parameters can be found on the
Configuration page within the Conext Gateway web application in the device
instance’s own menus. This document will also cover the additional parameters available
in the Advanced view.
Controls Settings
The Controls Settings menu provides the high-level controls that are expected to
be used often.
Item Description
Operating Mode
Places the Conext XW Pro into Standby or Operating
mode.
Reset
Allows the user to either do a software reset or revert all
configuration parameters to factory defaults.
Clear
Allows the user to clear active or logged faults and
warnings, and other logged statistics
Inverter Enable/Disable
Enable or disable grid-forming functionality
Table 4Controls Settings Menu
Conext XW Pro Owner's Guide Configuration
54 This document is intended for use by qualified personnel 990-91227A-01