Conext XW PRO 6848 6,800W 48V Installation
Table Of Contents
- Safety Information
- Label Symbols
- Product Labels
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Monitoring Operation
- External Monitoring Control
- Configuration
- Troubleshooting
- Specifications
- Electrical Specifications
- Mechanical Specifications
- Regulatory Approvals
- Grid Support Utility Interactive Functions
- California Rule 21: Smart Inverter Grid-Support Utility Interactive Functions
- Hawaiian Electric Company (HECO) Rule No. 14: Smart Inverter Grid-Support Uti...
- IEEE 1547-2003 Standard for Interconnecting Distributed Resources with Electr...
- Puerto Rico Energy Power Authority (PREPA) Technical Requirements for Interco...
- Defaults
Managing Compliance Regions
WARNING
ADVANCED CONFIGURATION HAZARD
n Advanced menu settings should be used by qualified personnel only.
n Three phase operation should be configured by qualified personnel only.
n Consult with the local utility before enabling Conext XW Pro sell mode or grid support
functions.
n Do not change these settings unless you are under the supervision and direction of
qualified personnel.
n Connect the Conext Gateway and the network router connected to the Conext Gateway
to an assured power source during configuration.
Failure to follow these instructions can result in death, serious injury, or equipment
damage.
The Grid Codes tab in the Conext XW Pro menus provides access to the autonomous
grid interactive functionality including active/reactive power curves and ride-through
profiles. By selecting the applicable grid compliance region, the Conext XW Pro
immediately makes all the appropriate configurations to conform with the requirements of
that region, which in turn also sets the nominal grid frequency of the unit. Further
adjustments of these functions can be applied after selecting a compliance region. The
menu options in this page are password protected.
Figure 25Compliance Regions
Configuration Conext XW Pro Owner's Guide
990-91227A-01 This document is intended for use by qualified personnel 99