Conext XW PRO 6848 6,800W 48V Manual

The Xanbus Network
A Xanbus network is a collection of Xanbus enabled devices that perform individual
functions, but also communicate and interact with other devices on the network. The
network capability of the Conext XW Pro provides a solution that simplifies and
automates the installation, configuration, control, monitoring, and integration of devices.
Network Components
NOTICE
SHORT CIRCUIT OF NETWORK COMPONENTS
n
This network is not an ethernet system. Only connect Xanbus-enabled devices to other
Xanbus-enabled devices. Do not attempt to connect Xanbus-enabled devices to other
networks or systems.
n Ethernet crossover cables are not compatible with the Xanbus system. Use Category 5
(CAT 5 or CAT 5e) cables to connect Xanbus-enabled devices.
n Do not install network terminators in an AC Sync port.
Failure to follow these instructions can result in equipment damage.
A Xanbus network consists of three elements: Xanbus-enabled devices, Xanbus power
supply, and Xanbus cables.
Each device is integrated into the network using cables, network connectors, and
terminators. An example of a network system is shown in Figure 57 .
Figure 57 Xanbus Network System (Example)
Power Distribution Panel (without AC Breakers)-enabled Devices
A Xanbus-enabled device is any product that works on a Xanbus network. Below
are some examples of Xanbus-enabled devices:
n Conext Gateway
n Conext XW Pro
Conext XW Pro Installation Guide Communication
99 This manual is intended for use by qualified personnel 990-91228A-01