Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Specification XW Pro 6848 NA
Surge Current (Inverter Mode)
52 A
RMS
for 60 seconds (240 V
nominal)
AC Input Voltage Range (Bypass/Charger Mode) 160-270 VAC (240 V nominal)
AC Input Frequency Range (Bypass/Charger Mode)
52-68 Hz (default) 44-70 Hz
(allowable)
AC Input Maximum Breaker Capacity 60 A maximum, double-pole
AC Output Maximum Breaker Capacity 60 A maximum, double-pole
AC1 (Grid) Input Current 3 - 60 A
AC2 (Generator) Input Current 3 - 60 A
AC Output Frequency 60.0 ± 0.1 Hz
Total Harmonic Distortion < 5% at rated power
Automatic Transfer Relay Capacity & Typical Transfer
Time
60 A / 8 ms
Auxiliary Relay Output 0 - 12 VDC, Maximum 250 mA
Grid Sell Current (Selectable Limit) 0 - 27 A
RMS
(240 V nominal)
Grid Sell Power 6,000 W
Peak Efficiency 95.1%
CEC Weighted Efficiency 93.0%
Specifications Conext XW Pro Installation Guide
990-91228A-01 This manual is intended for use by qualified personnel 112