Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Mechanical Specifications
NOTE: Specifications are subject to change without prior notice.
Model XW Pro 6848 NA
Non-Volatile Memory Yes
Inverter Information Panel
Status LEDs indicate AC In status,
events/warnings, equalize mode,
battery level. 3-character display
indicates output power or charge
current, event/warning codes.
STARTUP/SHUTDOWN and equalize
button
Multiple Unit Configurations
Up to 3 parallel units in 120/240
three-wire configuration.
Electrically, up to 4 parallel units
can be connected and operated.
System Network
Conext Xanbus™ (publish-
subscribe network, no need for
hubs or special cards)
Emissions
FCC Part 15, Class B Industry
Canada ICES-003 Issue 5,
Class B
Regulatory approvals
CSA C22.2 No. 107.1-01 -
General Use Power Supplies
UL 1741 - 2nd Ed - Inverters,
Converters, Controllers and
Interconnection System
Equipment California tariff Rule
21-compliant and certified to
UL1741SA
Enclosure Type NEMA Type 1—Indoor
Rated Temperature Range
(meets specifications)
32–77 °F (0–25 °C)
Operational Temperature Range -13–158 °F (-25–70 °C)
Storage Temperature Range -40–185 °F (-40–85 °C)
Inverter Dimensions (H × W × D)
23 × 16 × 9" (580 × 410 × 230
mm)
Shipping Dimensions (H × W × D)
28 × 22 ½ × 15 ½” (711 × 572 ×
394 mm)
Table 13Conext XW Pro Mechanical Specifications
Conext XW Pro Installation Guide Specifications
113 This manual is intended for use by qualified personnel 990-91228A-01