Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Model XW Pro 6848 NA
Inverter Weight 125 lb (57 kg)
Shipping Weight 132 lb (60 kg)
Storage Temperature Range -40–185 °F (-40–85 °C)
Figure 64 Conext XW Pro Block Diagram
Regulatory Approvals
Electromagnetic Compatibility
The Conext XW Pro inverter complies with emission limits specified in:
n FCC Part 15B Class B limits
n Industry Canada ICES-003 Class B limits
Utility Interactive
Conext XW Pro inverter qualifies as a Smart Inverter
1
and complies with multiple
jurisdictions grid interconnection standard requirements that are currently in effect in
different jurisdictions:
n UL1741, 2nd Edition -2018 (“UL1741SA”)
n CSA 107.1-2016
n IEEE 1547-2003 Standard for Interconnecting DER with Electric Power Systems
1
A Smart Inverter is a Distributed Energy Resource (DER) that autonomously performs
functions that minimize the risk of unstable grid operations by providing dynamic active and
reactive power support, voltage and frequency ride-through, ramp-rate control and other
functions.
Specifications Conext XW Pro Installation Guide
990-91228A-01 This manual is intended for use by qualified personnel 114