Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Contents
Safety Information 2
Label Symbols 3
Radio Frequency Interference Notices 4
Audience 5
About 6
Purpose 6
Scope 6
Abbreviations and Acronyms 6
Related Information 7
Product Safety Information 8
General Safety Instructions 8
Precautions when Working with Batteries 10
Limitations on Use 10
Explosive Gas Precautions 11
Introduction 16
Overview 17
Inside the Box 17
Conext XW Pro and System Components 17
Battery Temperature Sensor 17
Conext XW Jumpers (For Single-Phase Conversion) 18
Conext XW Pro Features 18
Optional Accessories 18
Conduit Box 18
Power Distribution Panel (PDP) 19
PDP 120/240V 60A Breaker Kit 20
Conext MPPT 60 150 Solar Charge Controller 21
Conext MPPT 80 600 Solar Charge Controller 21
Conext Automatic Generator Start (AGS) 22
Conext Gateway 22
Conext Battery Monitor 22
Breaker Kits 23
Pre-Installation Planning 24
Pre-Installation 25
Planning the Installation 25
Installation Tools and Materials 25
Location 26
Clearance Requirements 26
Conext XW Pro Installation Guide
990-91228A-01 This manual is intended for use by qualified personnel 12