Conext XW PRO 6848 6,800W 48V Manual
Table Of Contents
- Safety Information
- Label Symbols
- Radio Frequency Interference Notices
- Audience
- About
- Product Safety Information
- Introduction
- Pre-Installation Planning
- Wiring
- Removing the AC Access Panel and PDP Internal Faceplates
- Communication Ports and BTS Port
- Wiring the Conext XW Pro with a PDP
- Basic Functional Test – Single Inverter
- Wiring Additional Conext XW Pro units with a PDP
- Basic Functional Test - Multiple Inverters
- Wiring the Conext XW Pro Inverter/Charger without a PDP
- Communication
- Access Installation
- Specifications
- Wiring Diagrams
- Converting Split-phase to Single-phase
Figure 4 Conext XW Pro Power Distribution Panel with Conduit Box
Not shown:
n One ground terminal bus bar
n One neutral terminal bus bar
n One battery negative terminal bus bar
n Cable ties (3x)
n Xanbus clip-on ferrite bead
PDP 120/240V 60A Breaker Kit
Part Number 865-1215-01
Included: Three 60 A, 120/240 VAC, two-pole, Square-D, type QOU, DIN-rail mountable
AC breakers, jumpers, bypass interlock.
Introduction Conext XW Pro Installation Guide
990-91228A-01 This manual is intended for use by qualified personnel 20